SECTION I - PRODUCT IDENTIFICATION
Manufacturer's Name: PAVE TECH, INC.
P.O. Box 576
Prior Lake, Minnesota 55372 U.S.
Phone: (952) 226-6400
Fax: (952) 226-6406
Toll Free 800-728-3832
Name: Type 3 SuperWET
CAS No.: 644-40-5
UN No.: none
Section II – Hazardous Ingredients
Polisocyante Based on Diisocyante 100%
Section III – Physical Data
VOC: 0 g/L
Boiling Point 368ºC
Dark Brown, Earthy/Musty
Section IV – Fire and Explosion Hazard Data
Ignites only after considerable preheating.
Extinguishing Media: Sand, Foam, Water
Section V – Health Hazard Data
Routes of Entry: Inhalation, Skin Absorption
First Aid Procedures
Eye Contact: Irritating to eyes, wash carefully with plenty of water
Inhalation (Breathing): May cause sensitization by inhalation. Outgasses only CO2 in trace amounts.
Skin Contact: Avoid skin contact, irritant
Ingestion (Swallowing): May cause sensitization
Section VI – Reactivity Data
Incompatibility: alcohol, amins (exoterme reaction possible)
Conditions to avoidd: If mixed with water, CO2 will be formed. Container must be decompremized.
Section VII – Spill or Leak Procedures
Release or Spill: Cover with sawdust, sand, deposit in open container after approximately one hour.
Waste Disposal: Industiral waste; deposit according to regulations.
Section VIII – Special Protection
Gloves: Use neoprene or rubber protective gloves
Ventilation: Use local exhaust
Section IX – Special Precautions
Handling & Storage: Maximum temperature 50ºC