Cement-Free Polymer Enhanced Joint Sand
- Prevents weeds
- Deters ants
- Reduces sand loss
- Sealers can be applied with PolyLOCK in the joints
- Made with specialized polymers
- No cement additives means NO White Haze
POLYLOCK Cement-free PolyLOCK is a polymer enhanced joint sand for flexible and semi-rigid pavement systems. PolyLOCK works great within the joints of concrete, clay, and natural stone pavements when installed over a drainage bed. Once activated, PolyLOCK offers an extremely hard surface, due to innovative polymers that were unavailable until now. Unlike other polymeric joint sands PolyLOCK does NOT contain any cement additives, and will not create white hazing on the pavements surface. Recommended for all types of pavement applications, commercial or residential, while creating the hardened joint surface that your high heel wearing customers demand.
POLYLOCK Once pavers are installed, spread PolyLOCK PREMIX onto the pavement, then sweep into the joints. Continue spreading PolyLOCK during compaction until the joints are full. Sweep off excess PolyLOCK, then use a blower to further clean the surface. Activate by misting with water, allow five minutes between misting applications. PolyLOCK requires 3 mistings to ensure it has been properly activated.
Once pavers are installed, empty the bags of POLYLOCK PREMIX over the pavement and sweep into joints with a broom. Continue spreading POLYLOCK during compaction until the joints are full. Sweep off excess POLYLOCK, then use a blower to further clean the surface. Activate by applying low amounts of water to pavement surface, with five minutes in between water applications. POLYLOCK will require 3 applications to ensure the entire stabilized joint has been properly activated.
Architectural Product Specifications:
PolyLock Sales Brochure - View PDF
SandLOCK | PolyLOCK